|
| |
Shock Rack Mount Shipping Case
|
|
|
Matrix
Shock Rack Mount Shipping Cases have been designed and engineered to provide
complete protection for the most sensitive E.I.A. 19" rack mountable
equipment and instrumentation.
|
"Case Matrix - PROTECTION FOREVER"
-
Rack Rails: Front and rear rack rails are standard. Made from heavy duty 12 ga. steel and tapped with 10-32 holes our Cases provide a precise platform for all 19"
rack mountable equipment and systems.
-
Foam Suspension System: For total shock absorption the case floor section has a 2" thick high compression Polyethylene Foam and a 2" thick soft Polyurethane Foam (Ester) on top and all sides.
-
Removable Front & Rear Lids: The Front and Rear Lids are removable for complete access to your electronic equipment from both sides.
-
Case Hardware
| |
CASE DIMENSIONS:
| |
|
Rack Size (UNITS)
|
Rack Depth
|
Front Lid Depth
|
Rear Lid Depth
| |
Minimum Case Size
|
2U
|
8.50"
|
3.00"
|
3.00"
| |
Maximum Case Size
|
26U
|
32.00"
|
5.00"
|
5.00"
|
|
MATERIALS:
| |
Construction
|
Max. Load
| |
1/4" ABS / Ply
|
90 Lbs.
| |
1/4" Fiberglass / Ply
|
90 Lbs.
| |
3/8" ABS / Ply
|
200 Lbs.
| |
3/8" Fiberglass / Ply
|
200 Lbs.
| |
1/2" ABS / Ply
|
500 Lbs.
| |
1/2" Fiberglass / Ply
|
500 Lbs.
|
OTHER RACK CASE OPTIONS:
- CASTERS: Fixed and removable casters, 3.50" diameter wheels.
- COLORS: Black is the standard Matrix case color. Other colors are available at no extra charge (Blue, Grey, Red, White, Green) but may require longer lead times.
- Divider Systems: Inner partitions divide heavy loads inside the case, each section will have its own foam cushion system.
- Tabletop: Container lids convert to a workstation table, assembly set-up requires less than a minute.
- Sliding Drawers: Fully-enclosed steel chassis or economical Fabricated Drawers for storage of tools and accessories in a rack. Available in three sizes: 2-Space, 3-Space or 4 rack Space. Steel
Drawer extends a full 14" for easy access.
- Special Non-Rack
Mountable: For non-rack mountable equipment, Case Matrix is experienced in designing foam systems for equipment use within the container (Workstations), taking into
consideration ventilation of equipment as well as ergonomics.
Matrix
Home
| Hinged
Style
| Clamp-On
Lid Style | Pull-Over-Cover
Style | Rack
Case | Shock-Mount
| Roll-Model
Carrying Container
|
